3+2 Understands National Standards For Clothing Inspection

Each type of textile product has relative national standards and related standard requirements, but GB18401-2010 "national textile product basic safety technical specification" and "GB/T29862-2013"

The identification of fiber content is a basic textile standard.

Many people think that

Testing international standards is very long and tedious, resulting in a psychological conflict against it. In fact, the standard is long but it is easy to read. Next, we will uncover the seals of these two national standards.

Article 3 read GB18401-2010 "national textile product basic safety technical specification"

1. All technical contents of this standard are mandatory.

Scope of application of this standard: applicable to the production, sale and use of textile and clothing products in China.

Two. Classification of test results

Class A: infant products (productsforbabies)

Textile products worn or used by infants aged 36 months or less.

Class B: products that are directly exposed to the skin (productswithdirectcontacttoskin)

When wearing or using, most of the area of the product is directly related to the skin of the human body.

Class C: products that are not directly exposed to skin (productswithoutdirectcontacttoskin)

When wearing or using, the product does not directly contact with the human skin, or only a small part of the textile product directly contacts with the human skin.

The form will be more clear and intuitive.

Three. Testing items:

2, master GB/T29862-2013 "textile fiber content logo".

I. durability labels:

The product is always attached to the product and can withstand the maintenance procedure in the instructions for the product, keeping the legible and legible labels.

Two, fiber content allowance:

1. when a part of a product or product is made entirely of one fiber, the fiber content is expressed by "100%", "pure" or "full", and the fiber content is 0..

2. a certain part of a product or product contains fibers that can be judged to be decorative or characteristic fibers (for example, elastic fibers, metal fibers, etc.), and its total content is less than 5% (pure wool woolen products are less than 7%). The fiber content can be expressed in terms of "100%", "pure" or "full", and it is indicated that the "fiber XX" has a tolerance difference of 0.

3. when a certain part of a product or product contains two or more fibers, the tolerance difference of each fiber marked on the label is 5%, and the fiber content of the filler is 10%.

4. when the fiber content of a filler on the label is less than 20%, the allowance of fiber content is 5%; when a filler is filled,

When the content is less than 5%, the actual content should not be 0.

5. when a certain fiber content or two or more fibers in the product is less than 0.5%, the total amount is not included.

If applicable, it can be labeled as "trace XX" or "trace amounts of other fibers".

It is more intuitive and simple to interpret trivial standards through the 3+2 mode, so that the standards can be applied to standards, and application standards can protect their rights and interests.