Documentary Quality Inspection: Sample Making Of Garment Factories

I.

After receiving the order, our company will provide drawings or reference samples for factory production, sample design, so that the designers can observe the design effect.

Several problems should be noted at this time:

1. when the pattern is made, the fabric is similar.

However, it is necessary to have similar cloth properties. For example, the coal wool sweater must be basically the same as the weight of the grain, but it can not be used without a shake grain or with other kinds of cloth, which makes the performance of the whole garment change.

2., considering the consistency of workmanship, the whole garment looks similar to the original. When doing this design, the work should be considered more advanced, and the workmanship of clothes should be suitable for a large number of streamlined operations.

Some workplaces should be changed in a complicated way, but changes in workmanship can not affect the appearance of garments.

3. the use of excipients should be adjusted to future purchases and the cost of garments.

4. the color of the main and subsidiary materials should be similar to the drawings or the actual samples.

Two. Batch sample

When the style sample is finished, it is sent to the guest regularly to make the change. This change is not only a mistake change, but a guest designer should change according to the market situation.

At the same time, make corresponding changes according to the factory's production.

According to the change of the guests, in principle, the sample is made with the official accessories and the samples are arranged according to the specific requirements in the table and the sample specifications.

Three. Large sample before delivery.

)

After completing the last few steps.

The manufacturer of raw materials and auxiliary materials can carry out mass production of raw and auxiliary materials.

After making all the main and auxiliary materials, the main garment accessories must be proofed again in the later production.

This sample must be one hundred percent of the correct material. Under normal circumstances, it is not allowed to replace the substitute. The sample for large cargo must be very careful. Once the sample of the large sample is approved by the customer, it can be opened in large quantities, and the production of large goods will follow suit.

Four. Selling samples (ship samples)